L&M Construction Chemicals: All Products
Protects concrete from the damaging effects of water and road salts and deicing chemicals. It is a water-based silane/siloxane treatment that is odorless, nonflammable and VOC compliant. AQUAPEL offers positive chloride-ion screening, prevents moisture intrusion, minimizes rebar corrosion and potential concrete spalling. Complies with all state and federal VOC regulations. Available in two concentrations. One coat application recommended for most applications.
COMPLIANCE: NCHRP 244, ASTM C-672
A citrus-terpene-based degreaser and stripper that is designed for heavy duty cleaning, stripping, and everyday maintenance. CITREX effectively removes grease, dirt, and curing compounds from concrete floors. CITREX is concentrated and can be diluted with water to suit the need. Pleasant orange smell.
Our "top of the line" precision, non-shrink structural grout. Extended work time. Designed for critical grout applications under vibrating machinery and in applications where high flow, non-shrink performance is needed. Conforms to ASTM C-1107.
Our high performance, chemical release agent that eliminates concrete buildup from sticking to all types of forms, in all types of weather. Excellent for wood, aluminum and steel forms. VOC compliant, DEBOND forms a water-resistant barrier that greatly reduces form maintenance and concrete surface defects (bugholes). DEBOND is less expensive than conventional form oil per square foot, and is the most cost effective extended warranty you can buy for a set of forms. Low odor DEBOND contains no diesel fuel or fuel oil, only the finest, highly refined raw materials.
Cures, seals and dustproofs concrete surfaces, sealing out job site dirt, oil and mortar drippings. Allows proper bonding of resilient tiles. Resists yellowing. Easy to apply.
COMPLIANCE: ASTM C-309, Type 1; ASTM C-1315, Grade B. VOC - most states.
High solids means high gloss and top of the line curing with our DRESS & SEAL #30. This product cures, seals and dustproofs concrete with a high solids (30%) blend of UV stable blended acrylic polymers.
COMPLIANCE: ASTM C-309, Type 1; ASTM C-1315, Grade B. VOC - most states.
DRESS & SEAL WB formulations are water-based, low VOC, acrylic copolymer solutions that cure, seal and dustproof concrete without yellowing. The tough film locks in moisture, curing the concrete for maximum hardness. These clear, fast drying, sprayable liquids are equally effective on interior as well as exterior surfaces.
DRESS & SEAL WB 25 formulation is a water-based, low VOC, acrylic copolymer solutions that cures, seals and dustproofs concrete. The tough film locks in moisture, curing the concrete for maximum hardness. This clear, fast drying, sprayable liquid is equally effective on interior and exterior surfaces.
A single component, polymer-reinforced, high-strength, cement-based patching and repair mortar. DURACRETE has been designed to repair, slope or level structurally sound, concrete surfaces that are pitted, worn, scaled or spalled. In addition, this product can be sculpted to repair concrete members and deep voids. This patching and repair mortar is effective in both interior and exterior applications. When properly applied, DURACRETE will produce a strong, durable, well-bonded surface of desired texture.
A high strength, self leveling concrete overlay topping that is easy to place. DURAFLOOR HP rapidly gains strength to allow pedestrian and vehicle traffic or mechanical polishing within 24 hours after placement. The time-proven benefits of positive bonding and durability assure precise decorative repair of worn and pitted concrete surfaces.
A unique blend of cements, polymers, color and mineral aggregates to be used to resurface existing concrete surfaces. It combines the durability of concrete with color and decorative aggregate to produce a high-performance floor with enduring beauty.
A cement-based, general use construction grout, ideal for column base plates, anchor bolts, small equipment, and grouting concrete wall penetrations. Conforms to ASTM C-1107 at a plastic and flowable consistency.
A cement-based, very rapid hardening patching system that develops quick, high strengths, is non-shrink and provides excellent bonding qualities in both flowable and no-slump consistencies. Recommended in application depths of 1" or more.
A versatile, polymer modified, cement-based mortar with extended working time for easy placement. This extremely durable repair material provides excellent bond, resistance to corrosion, very low permeability and high compressive strengths. Can be placed in interior spalls of 1/8" or greater.
DURAPATCH VOH is a pre-measured cement-based thixotropic mortar system consisting of polymers, aggregates and additives for easy-to-use vertical and overhead patch repairs. This product prevents damage from mechanical impact and abrasion, environmental and freeze-thaw deterioration and chemical destruction from mild acids, caustic solutions and other chemical contaminants COMPLIANCE: ASTM-C 928
A ready-to-use waterproof hydraulic cement. DURAPLUG sets, expands, and anchors quickly to stop water flow and seepage through concrete and masonry openings. Packaged in convenient, re-sealable plastic containers.
For that needed abrasion resistant industrial floor topping we recommend DURATOP HP. This flowable natural metamorphic spinal aggregate produces a highly abrasion and chemical resistant solution for abusive impact and concrete floor wear conditions. The high concentration of the very abrasive resistant aggregates consisting of silica oxide, aluminum oxide, and ferric oxide assure a dense, tough floor resistant to impact and abrasive wear with a blend of cement to return floors to service in 48 hours.
Offers effective stripping of forms at economical prices by means of a physical barrier that prevents concrete from attaching to concrete form surfaces. Low odor, E-Z STRIP contains no fuel oil or diesel fuel.
STOP PLASTIC SHRINKAGE CRACKS WITH E-CON!
E-CON is a scientifically developed concentrated liquid that, when placed on fresh concrete, forms a thin, continuous film which prevents premature and rapid loss of moisture from the concrete surface. E-CON is very effective in minimizing the negative effects of rapid drying conditions due to high temperatures, low humidity, high winds and direct sunlight. At less than one cent a square foot, E-CON is an insurance policy you can afford to have!
The industry's ultimate dry shake for industrial floors requiring additional abrasion resistance and impact protection. EMERYPLATE FF is engineered to be able to spread onto a newly placed, highly plastic slab and still achieve a flat floor. Rust-free performance is ideal for wet conditions.
The most durable floor system available. It is a flowable, emery/corundum, heavy duty topping for ACI Class 6 and 7 industrial floors. It is engineered to provide an extended working time and flowable performance for easy placement. EMERYTOP 400 produces a concrete floor surface that gives appreciably longer service life than normal high strength concrete, iron or trap rock toppings.
EPOBOND is a 100% solids, high-modulus epoxy adhesive used to bond fresh concrete to hardened concrete; steel to fresh or hardened concrete; as a grout for anchor bolts, dowels and rebar; as a binder for epoxy concrete, and for bonding other dissimilar materials.
A high strength, hig flow, high performance epoxy resin grout that cures at normal temperatures into a tough, non-shrinking, precision grout of high chemical resistance. EPOGROUT 758 is scientifically formulated to withstand severe dynamic load shock in marine and heavy duty industrial applications.
A 100% solids, moisture tolerant epoxy primer for concrete surfaces. Combining water insensitivity with good wetting properties, EPOPRIME is the recommended primer for most installations of topping and overlayments. EPOPRIME is formulated to accept a sand broadcast and to work as a general purpose primer.
FASTRAK is a high strength, cement-based concrete patching compound which offers high strength, rapid setting, and assures a concrete repair that is structurally sound and aesthetically pleasing. After initial set, FASTRAK may be shaved or shaped to conform to surrounding surface contour.
A proprietary concrete cleaner and conditioner designed for on-going maintenance of hardened polished concrete surfaces. This product is highly concentrated and contains state-of-the-art wetting, emulsifying agents and optical brighteners. This product is specifically manufactured to be used for maintenance of FGS PERMASHINE Floors. In addition to cleaning ingredients, FGS Concrete Conditioner contains proprietary hardener ingredients that continue to reinforce surface durability and improve visual appearance.
A proprietary, chemical hardening solution that is formulated to increase the wear resistance and surface strength of concrete floors that have been mechanically ground, smoothed and polished. This product is a component of the FGS PERMASHINE Floor Rejuvenation Process. Answers the unique demands of a flat, ground and diamond polished floor better than any other product.
A concrete hardener and dustproofer that contains magnesium and zinc fluosilicate solution with an anionic surfactant for deep penetration and 100% chemical action. Five year warranty against dusting available.
An effective water repellent treatment for concrete block and other very porous surfaces. Formulated scientifically with the latest generation of water-based, VOC compliant, active ingredients, HYDROBLOCK is an effective long term treatment for difficult to seal concrete block and split face concrete masonry.
Our newest generation of water-based, VOC-compliant water repellents. This reactive silane and siloxane blend penetrates surfaces to form an invisible, long lasting, water-repellent barrier. Odorless and easy to apply. HYDROPEL WB is recommended for dense and moderately porous vertical masonry and concrete substrates.
A rapid-setting, polyurea joint filler that protects interior saw cuts, control joints, and random concrete floor cracks subjected to heavy loads and high volume of forklift traffic from edge spalling and deterioration.
L&M CURE is a VOC-compliant, ready-to-use, nonresidual concrete curing agent that penetrates surfaces to cure the concrete from within. It is a water-based, clear, sprayable liquid that offers residue free performance.
L&M CURE R is a water borne, ready-to-use, clear resin based membrane cure. The membrane forming ability of L&M CURE R is designed to retain sufficient moisture to properly hydrate concrete placements.
L&M CURE R-2 is a water borne, ready-to-use, opaque, white pigmented, resin based, membrane forming cure formulated for exterior pavements. The excellent light reflectance of L&M CURE R-2 white pigmented cure makes it suitable for state highway and other exterior pavements.
COMPLIANCE: L&M CURE R - ASTM C-309, Type 1, Class B L&M CURE R-2 - ASTM C-309, Type 2, Class B; AASHTO-M-148, Type 2
L&M CURE W is a water borne, VOC compliant, ready-to-use wax based curing compound. L&M CURE W is odor-free and therefore suited for use in enclosed areas. Because of its waxy membrane, L&M CURE W is not recommended for floors scheduled to receive subsequent treatments or toppings.
L&M CURE W-2 - A water borne, VOC compliant, ready-to-use, white pigmented wax based curing compound. L&M CURE W-2 is best used where high sunlight reflectance and maximum curing properties are required, such as state highways, city and county roads, bridge decks, and dams.
COMPLIANCE: L&M CURE W - ASTM C-309, Type 1, Class A; AASHTO-M-148, Type 1 L&M CURE W-2 - ASTM C-309, Type 2, Class A; AASHTO-M-148, Type 2
L&M TRAP ROCK is a combination of 100% graded trap rock and portland cement. It is a polyhedral shaped, abrasion resistant, chemically inert, non-absorbent aggregate produced from igneous rock. This dense mineral aggregate is crushed into a polyhedral shape. It is carefully graded to assure ease of placement. This results in interlocking dense mass that produces high performance floors of excellent abrasion resistance.
A self-leveling, cement-based underlayment that is easy to place, and easy to cover. Its rapid set characteristics allow a fast return of the floor to traffic. Recommended for repair depths from featheredge to 2", that are scheduled to be covered.
a VOC-free, environmentally friendly lithium silicate concrete floor densifier, hardener, and sealer. Penetrates bare concrete surfaces and immediately transforms weak calcium hydroxide and calcium carbonate compounds found in concrete into dense, insoluble, durable flint-like wear surfaces.
LUMISEAL FX is a blush resistant, non-yellowing, curing and sealing compound designed to provide attractive, high gloss sealing qualities that are totally resistant to discoloration from ultraviolet light exposure. LUMISEAL FX is formulated with advanced water based, low-VOC emulsion chemistry that produces a very durable film with superior early water resistance to blushing, whitening or blistering. LUMISEAL FX is recommended for use on interior or exterior decorative and colored concrete, and where low-odor performance is required.
LUMISEAL PLUS is a non-yellowing, high performance cure and sealing compound designed to provide high gloss sealing qualities that are totally resistant to yellowing from ultraviolet exposure. LUMISEAL PLUS is available in a standard high solids formulation and is suitable for use on both interior and exterior surfaces.
LUMISEAL WB and LUMISEAL WB PLUS are 100% non-yellowing, water based, high performance, pure acrylic cure and sealing compounds. They are designed to provide sealing qualities that are totally resistant to yellowing from ultraviolet exposure. These products have low odor and are ideal for patterned, stamped, and architectural concrete.
COMPLIANCE: LUMISEAL WB - ASTM C-309; LUMISEAL WB PLUS - ASTM C-1315, Grade A. VOC - all states.
PERK is an advanced, two part, 100% reactive, high solids, non-yellowing polyaspartic coating. It is available in clear and pigmented colors, with quartz aggregate or vinyl chip to produce an exceptionally durable and attractive seamless coating that can be placed in less than half the time necessary for comparable epoxy coatings. Key benefits of this product are a fast dual curing feature, wide temperature installation, with a simple one to one mixing ratio.
PERK! 100 is an odorless, high solids, non-yellowing polyaspartic sealer and top coat finish. It is available in clear and pigmented colors, and can be used with colored quartz aggregate and vinyl chip to produce an exceptionally durable and attractive seamless coating that can be placed in less than half the time necessary for comparable epoxy coatings.
PERK! Epoxy Fill Coat is a medium viscosity, 100% solids, self-leveling epoxy intermediate fill coat to be used with subsequent coats of PERK Polyaspartic sealers. Perk Epoxy Fill Coat should be applied to primed new, cured concrete that is a minimum of 30 days old.
PERK! Restore is a fast setting, low odor, two-component advanced polymer resin designed for patching and repair of concrete. Restore's very thin consistency and high bonding properties allow it to penetrate deep into concrete and create a tenacious bond for a permanent repair. Restore quickly sets and can be ground within 30 minutes to repair worn, spalled and cracked concrete.
PETROTEX is a ready to use, quick drying, low-odor, water-based solution containing a new generation, invisible, and VOC compliant blend of silane, siloxane and fluoro-polymers. PETROTEX effectively treats concrete pavements, driveways, commercial and industrial building floors to resist the penetration of water and oils. PETROTEX penetrates into the surface, forming a long lasting oil and water repellent barrier that retards the penetration of these contaminants.
An advanced water-based latex polymer dispersion for priming very dense, smooth, nonporous, non-absorbent substrates such as terrazzo, marble, metal decking, ceramic and quarry tile, and epoxy flooring prior to the installation of L&M toppings, LEVELEX products and cement based repair mortars.
A ready mixed, 98% pure quartz silica mineral aggregate, dry-shake hardener that increases floor surface durability from four to five times over normal concrete. It contains graded aggregates and proprietary admixtures that allow this product to be broadcast onto a highly plastic slab to achieve a flat floor. Colors and light reflective formulations are available.
QUARTZPLATE FF LIGHT REFLECTIVE is a ready-mixed, scientifically graded, 98% pure silica aggregate, non-metallic dry shake-on hardener which combines the abrasion resistance of the natural quartz aggregates with energy saving light reflectivity. These treated floors wear up to four times longer than normal concrete.
Our "top of the line," new generation concrete chemical hardener, densifier, dustproofer, and sealer. SEAL HARD hardens and seals the concrete near surface wear zone better than any product in its class. It prevents tire marking and minimizes contaminant penetration. SEAL HARD is recommended for use on ACI Class 4, 5, and 9 (super flat) floors, and for Class 6 industrial floors. USDA approved. Ten year warranty against dusting available.
VIVID DYE WB PLUS is formulated using extremely fine molecules of color designed to penetrate and color any cementitious surface. VIVID DYE WB PLUS was created for use with FGS PermaShine polished concrete floor system, but can be used as a base color or touch up for acid stained concrete or as a coloring agent itself.